SUBARU SAMBER

Spark plug replacement GD-TV2

I removed the spark plugs and inspected them.Not only were they extremely dirty, but the gap had opened up and they were...
SUBARU SAMBER

ISCV cleaning & air cleaner element replacement, GD-TV2

The engine of my GD-TV2 wouldn't start as soon as I brought it home, but now it starts only when the temperature is high...
SUBARU SAMBER

Baby turtle on the mother turtle’s back, part2

And again!I'm back home with a Kei-car, SUBARU SAMBER VAN, GD-TV2, on top of a rental truck. (^_^)I got a spare car beca...
SUBARU SAMBER

Engine replacement -11- Cam sprocket replacement, GD-TT2

Summary so far:I replaced my EN07V engine, which had melted spark plugs on the #2 and #3 cylinders and chipped intake va...
SUBARU SAMBER

Engine replacement -10- Check the ECU, GD-TT2

I'm repairing a Subaru Sambar that had its engine replaced, but I still can't figure out why the new engine won't start....
SUBARU SAMBER

Engine replacement -9- Compression measurement, GD-TT2

When I removed the engine, I had to disconnect a lot of surrounding connections, so it was quite a challenge to put ever...
SUBARU SAMBER

Engine replacement -8- Cleaning the AT oil pan and connecting the engine, GD-TT2

A lot of the ATF leaked out during this work, so I would like to get as much of the old ATF out as possible and then rep...
SUBARU SAMBER

Engine replacement -7- Torque converter, connected to AT, GD-TT2

When I removed the torque converter, the ATF inside leaked out, so I thought I might as well drain it all and fill it wi...
SUBARU SAMBER

Engine replacement -6- Oil cooler and head installation, GD-TT2

The original engine, the EN07V, was an automatic transmission and had an oil cooler.The replacement engine, the EN07F, w...
SUBARU SAMBER

Engine Replacement-5- Preparing the replacement engine intake system, GD-TT2

The engine that had stopped working was missing two intake valves, and the surviving cylinder had insufficient compressi...